DS200CTBAG1ADD GE Analog Termination Module Mark V Ge Turbine Control

DS200CTBAG1ADD GE Analog Termination Module Mark V Ge Turbine Control

Product Details:

The DS200CTBAG1ADD is a terminal board designed for use within the GE Mark V Speedtronic system. The Speedtronic line was created by

General Electric for the control of both large and small gas and steam turbine systems. The MKV can be designed with either Simplex or

TMR/triple modular redundant architecture to meet the needs of the connected turbine system.

The DS200CTBAG1ADD is a long, narrow board with only a few types of components. It is drilled at each corner and along its long edges to allow

for mounting hardware and other connections. Two of these drill holes are ringed with a conductive material. The board is marked with identifying

codes including the board ID number and the company logo.

The DS200CTBAG1ADD is an Analog Termination Module. It is typically located within the <R5> core. The board has multiple connectors,

including two COREBUS connectors (JAI and JAJ.) The DS200CTBAG1ADD has two double-stack terminal strips located on one long board

edge with multiple connectors on each terminal strip. There are five vertical pin cable connectors, two vertical pin header connectors, and a 9-pin

male serial connector.

Other components on the DS200CTBAG1ADD include resistor network arrays, relays, transistors, over twenty metal oxide varistors (MOVs,) over

a dozen jumper switches, along with a number of capacitors and resistors.