ETHERNET 1756-EN2T/C ROCKWELL ALLEN BRADLEY PLC CONTROLLOGIX IP BRIDGE MODULE 10/100 FE
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Name||1756-EN2T/C Model ControlLogix ControlLogix EtherNet/IP Bridge Module 10/100 FE Allen Bradley PLC||Product ID||1756-EN2T/C|
|Product Type||Modules||Product Net Height||150mm|
|Product Net Width||120mm||Product Net Depth / Length||50mm|
|Product Net Weight||0.3kg||Quality||100% Brand New|
allen bradley en2t,
1756-EN2T/C Model ControlLogix ControlLogix EtherNet/IP Bridge Module 10/100 FE Allen Bradley PLC
|Courier Partner||DHL, UPS, TNT, FedEx and EMS|
The Allen-Bradley 1756-EN2T is a part of the ControlLogix Communication Module series.
It is an EtherNet/IP (Ethernet Industrial Protocol) interface communication module. It supports general messaging,
real-time I/O messaging, and information exchange for applications like Real-Time Control, Time Synchronization, and Motion.
The 1756-EN2T also has the CIP safety standard by allowing simultaneous transfer of safety and control data and diagnostics information.
It uses advanced communication chips and physical media.
The 1756-EN2T supports 10 to 100 Mbps EtherNet/IP communication rates and uses Twisted pair copper media.
It supports 256 Logix and 128 TCP/IP communication connections. It can support a maximum of 8 axes for integrated motion on the Ethernet/IP
Network and draws 1 A current at 5.1 Volts DC. It has a maximum power dissipation of 5.1 Watts and thermal dissipation of 17.4 BTU/hour.
It can be installed in any slot in the ControlLogix Chassis. For wiring, it uses unshielded RJ45, category 5, twisted-pair cable connectors to
interface with the controller. To operate an EtherNet/IP network, parameters such as an IP address, Subnet masks, Gateway, etc. must be
defined. The 1756-EN2T bridge has various functions like providing support for messaging, distributed I/O, and tags. It encapsulates messages
within standard TCP/IP protocol. ControlNet and DeviceNet network protocols allow it to share a common application layer. It does not require any
scheduling or routing table to store information. Other features include a protected mode, an electronic keying, a device level ring network, and a
parallel redundancy protocol network support.