GE Mark VIe IS220PDIAH1A Discrete Input Module Gas Turbine Control Systems

September 11, 2024
Latest company news about GE Mark VIe IS220PDIAH1A Discrete Input Module Gas Turbine Control Systems

About IS220PDIAH1A

 

Labeled as a Discrete I/O Pack the IS220PDIAH1A model is used in the Mark VI Series alongside the YDIA Discrete Input Module as well.

 

Several different associated terminal boards can be used with the PDIA model which includes the following:

 

IS200TBCIH4C

 

IS200STCIH1A

 

IS200STCIH8A

 

IS200TBCIH2C

 

IS200TCIH2A

 

These models all work together with the PDIA to be approved for usage in hazardous locations. When being used in hazardous environments

 

there are specific certifications needed. Certification ULE207685 is used for non-hazardous, Class I Zone 2 Group IIC, and Class I Division 2

 

Groups, A, B, C, and D locations. There is a specific certification required when being used in ATEX Zone 2 Group IIC locations, the

 

certification is UL DEMKO 12 ATEX 1114875X.

 

Compared to other models in the Mark VI Series the IS220PDIAH1A does not necessarily have a specific faceplate as it is an I/O pack. On the

 

front of the device, there are seven indicators, on the right side of the pack in a group of three there are indicators for the power and two for

 

the link, one is indicated as ENet1, and the other ENet2. Underneath these three indicators, there is an Ethernet port which is used for cabling

 

the model to the Ethernet to allow for easy Ethernet communication.

 

The IS220PDIAH1A pack has location standards two of which are UL 600790 Ed. 5 and UL 60079-15 Ed. 3 for use in Class I Zone 2 Group

 

IIC.

 

latest company news about GE Mark VIe IS220PDIAH1A Discrete Input Module Gas Turbine Control Systems  0

latest company news about GE Mark VIe IS220PDIAH1A Discrete Input Module Gas Turbine Control Systems  1